Underwriters Laboratories Network IR Speed Dome Camera Instrukcja Użytkownika Pobierz pdf (Strona 39)

User Manual of Network Camera

which is not occupied.

Server Port: The default server port number is 8000, and it can be changed to any

port No. ranges from 2000 to 65535.

3. Click Save to save the settings.

Note: A reboot is required for the settings to take effect.

6.3.3 Configuring PPPoE Settings

Steps:

1. Enter the PPPoE Settings interface:

Configuration >Advanced Configuration > Network > PPPoE

Figure 6-8 PPPoE Settings

2. Check the Enable PPPoE checkbox to enable this feature.

3. Enter User Name, Password, and Confirm password for PPPoE access.

Note: The User Name and Password should be assigned by your ISP.

4. Click Save to save and exit the interface.

Note: A reboot is required for the settings to take effect.

6.3.4 Configuring DDNS Settings

Purpose:

If your camera is set to use PPPoE as its default network connection, you can use the

Dynamic DNS (DDNS) for network access.

Before you start:

Registration on the DDNS server is required before configuring the DDNS settings of

1 2 ... 34 35 36 37 38 39 40 41 42 43 44 ... 99 100

Brak uwag

Underwriters Laboratories Network IR Speed Dome Camera Instrukcja Użytkownika Strona 39