Underwriters Laboratories Network IR Speed Dome Camera Instrukcja Użytkownika Pobierz pdf (Strona 36)

User Manual of Network Camera

Figure 6-3 Time Sync by NTP Server

Note: If the camera is connected to a public network, you should use a NTP server

that has a time synchronization function, such as the server at the National Time

Center (IP Address: 210.72.145.44). If the camera is set in a customized network,

NTP software can be used to establish a NTP server for time synchronization.

 Synchronizing Time Synchronization Manually

Enable the Manual Time Sync function and then click to set the system time

from the pop-up calendar.

Note: You can also check the Sync with computer time checkbox to synchronize the

time of the camera with that of your computer.

Figure 6-4 Time Sync Manually

 Click the DST tab page to enable the DST function and Set the date of the DST

period.

Figure 6-5 DST Settings

2. Click Save to save the settings.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 99 100

Brak uwag

Underwriters Laboratories Network IR Speed Dome Camera Instrukcja Użytkownika Strona 36