Underwriters Laboratories DS-2CD2012-I Instrukcja Obsługi Pobierz pdf (Strona 11)

Network Bullet Camera·Quick Operation Guide

● Make sure that there is no reflective surface too close to the

camera lens. The IR light from the camera may reflect back into

the lens causing reflection.

● The foam ring around the lens must be seated flush against the

inner surface of the bubble to isolate the lens from the IR LEDS.

Fasten the dome cover to camera body so that the foam ring

and the dome cover are attached seamlessly.

Steps:

Attach the drill template on the wall. 1.

Attach the template Figure 2-1

Secure the camera to the ceiling with the supplied expansion 2.

screws.

Screw Hole

Template

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 21 22

Brak uwag

Underwriters Laboratories DS-2CD2012-I Instrukcja Obsługi Strona 11