Underwriters Laboratories DS-2CD2732F-I Instrukcja Obsługi

1 Camera Network Camera Quick Guide UD.6L0201D0184A01

Network Camera·Quick Guide 9 9 9 5 Serial Port 6 Power interface 7 Ethernet interface 8 Mounting Base 9 Lens Notes:  To reset the default paramete

Network Camera·Quick Guide 10 10 10 1.2 Wiring Figure 1-3 Wiring

Network Camera·Quick Guide 11 11 11 2 Installation Before mounting, please make sure that the device in the package is in good condition and all the

Network Camera·Quick Guide 12 12 12 Figure 2-1 Remove the Lower Dome and Black Liner 2.2 Mounting 2.2.1 Ceiling mounting Steps: 1. Disas

Network Camera·Quick Guide 13 13 13 4. If you want to route the cables inside the ceiling, drill a cable hole in the ceiling according to the drill t

Network Camera·Quick Guide 14 14 14 9. Adjust the image and focus. Please refer to the section 2.3 for more detailed information. 10. Install the inn

Network Camera·Quick Guide 15 15 15 Figure 2-5 Remove the water-proof plug 2. Route the power cable and network cable through the side outlet to the

Network Camera·Quick Guide 16 16 16 Note: For wall mounting, position the side outlet directly downward for water proofing. Figure 2-7 Side Outlet

Network Camera·Quick Guide 17 17 17 4. Route the cables through the hole in the center of the mounting base. 5. Align the camera with the mounting ba

Network Camera·Quick Guide 18 18 18 10. Align the lower dome with the camera. 11. Tighten the screws to secure the lower dome with the camera as show

Network Camera·Quick Guide 1 1 1 Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the

Network Camera·Quick Guide 19 19 19 Figure 2-11 Install the Mounting Adapter Figure 2-12 Secure Mounting Base Mounting Adapter Mounting Base

Network Camera·Quick Guide 20 20 20 5. Route the cables through the hole in the center of the wall mount. 6. Align the camera with the mounting base.

Network Camera·Quick Guide 21 21 21 10. Install the inner black liner back to the camera. 11. Align the lower dome with the camera. 12. Tighten the s

Network Camera·Quick Guide 22 22 22 4). Rotate the lens table to adjust the azimuth angle of the image. Figure 2-15 Three-axis Adjustment 2. Zoom an

Network Camera·Quick Guide 23 23 23 Figure 2-16 Lens Adjustment Menu Button Lever Lever

Network Camera·Quick Guide 24 24 24 3 Setting the Network Camera over the LAN Purpose: To view and configure the camera via LAN (Local Area Network),

Network Camera·Quick Guide 25 25 25 2. Change the IP address and subnet mask to the same subnet as of your PC. Refer to the following introductions t

Network Camera·Quick Guide 26 26 26 Note: Device can be searched and displayed in the list in 15 seconds after it goes online; it will be removed fro

Network Camera·Quick Guide 27 27 27 3). Enter the password of the admin account of the device in the Password field and click to save the changes.

Network Camera·Quick Guide 28 28 28 3. Enter the IP address of network camera in the address field of the web browser to view the live video. Notes:

Network Camera·Quick Guide 2 2 2 Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the l

Network Camera·Quick Guide 29 29 29 4 Accessing via Web Browser System Requirement: Operating System: Microsoft Windows XP SP1 and above version / Vi

Network Camera·Quick Guide 30 30 30 Figure 4-1 Login Interface 5. Install the plug-in before viewing the live video and managing the camera. Please

Network Camera·Quick Guide 31 31 31 Figure 4-2 Download Plug-in Figure 4-3 Download Plug-in

Network Camera·Quick Guide 32 32 32 Figure 4-4 Install Plug-in Figure 4-5 Install Plug-in

Network Camera·Quick Guide 33 33 33 6. Reopen the web browser after the installation of the plug-in and repeat the above steps 2-4 to login. Note: Fo

Network Camera·Quick Guide 0 0 0

Network Camera·Quick Guide 3 3 3 equipment, or dispose of it at designated collection points. For more information see: www.recyclethis.info. 2006/66

Network Camera·Quick Guide 4 4 4 Safety Instruction These instructions are intended to ensure that user can use the product correctly to avoid danger

Network Camera·Quick Guide 5 5 5  To reduce the risk of fire or electrical shock, do not expose this product to rain or moisture.  This installatio

Network Camera·Quick Guide 6 6 6  Do not place the camera in extremely hot, cold temperatures (the operating temperature should be between -30°C ~ 6

Network Camera·Quick Guide 7 7 7 Table of Contents 1 Overview ......

Network Camera·Quick Guide 8 8 8 1 Overview 1.1 Appearance Figure 1-1 Overview Table 1-1 Overview No. Description 1 Lower Dome 2 Black Liner 3 Reset