Underwriters Laboratories DS-2CD2332-I Instrukcja Obsługi Pobierz pdf (Strona 12)

Network Turret Camera·Quick Operation Guide

● Make sure that there is no reflective surface too close to the

camera lens. The IR light from the camera may reflect back into

the lens causing reflection.

● The foam ring around the lens must be seated flush against the

inner surface of the bubble to isolate the lens from the IR LEDS.

Fasten the dome cover to camera body so that the foam ring

and the dome cover are attached seamlessly.

Steps:

Rotate the trim ring counterclockwise to remove it from the 1.

camera.

Dissemble the Camera Figure 2-1

Trim Ring

Dome

Drive

1 2 ... 7 8 9 10 11 12 13 14 15 16 17 ... 25 26

Brak uwag

Underwriters Laboratories DS-2CD2332-I Instrukcja Obsługi Strona 12